virl & securecrt

busy busy busy


not so easy as one would expect .

taken from https://forums.vandyke.com/showthread.php?t=12170

(long live ki.. securecrt :) )

1. open VM Maestro
2. put 2 routers and connect them
3. click on background in design mode
4. properties -> topology -> management network ->select shared flat network
5. properties ->netkit-> ip address family -> select v4
6. properties ->netkit-> ip infracture address -> put 172.16.0.0
7. properties ->netkit-> prefix -> put 24
8. click on 1. router
9. properties -> extensions -> click +
10. key - put static_ip
11. value - put(it is possible you need to resize window to be able to put value) 172.16.1.11    
12. click ok
13. repeate 8.-12. on second router ( jsut in step 11. use 172.16.1.12)
14. click on build initial, and click ok on both windows
15. click on run simulation
16. once both routers are runing, you need to get path for securecrt exe. in my case it is C:\Users\tra20\app\securecrt8.x\SecureCRT.exe
17. put linked script somewhere to disk. in my case path is C:\Users\tra20\etc\virl\ScriptHost.vbs
18. click on file -> preferences in vm maestro, then terminal->cisco terminal
19. select use external termina applications
20. fill:
    1. ssh command :   C:\Users\tra20\app\securecrt8.x\SecureCRT.exe
    2. ssh arguments :  /SCRIPT "C:\Users\tra20\etc\virl\ScriptHost.vbs" /N %t /T /SSH2 /P %p %h /L guest /PASSWORD guest /ARG %r
21. to open ssh just click in view "simulations" on router, and ssh...